Rally Gear
The Rally-Gear makes it possible to operate the mechanical rally odometer Rally-GT and all other mechanical odometers in vehicles that do not have a speedometer cable to drive the odometers.
If the vehicle in question is equipped with an electric/electronic speedometer, the speedometer signal is tapped and used to control the Rally-Gear. The Rally-Gear software recognizes the characteristics of the speedometer signal and adjusts to it automatically (self-learning).
If no suitable speedometer signal is available, the Rally-Gear can be supplied with the necessary signals by its own sensor. The sensor is then mounted on the vehicle in such a way that it taps the rotation from, for example, the driveshaft or a wheel and thereby generates the signals.
The odometer is driven by a stepper motor, which changes its speed synchronously with the input signals.
The connection between the odometer and the Rally-Gear is made by a plug-in/plug-in drive shaft (see section "Accessories").
The Rally-Gear is powered by the 12V on-board voltage.
When driven by the Rally-Gear, the odometer is not calibrated by changing the gears on the odometer, but by adjusting the ratio of input signals and stepper motor speed in the Rally-Gear.
An app (Android only) is available for this purpose, which is installed on a tablet or mobile phone. When the tablet or mobile phone is connected to the Rally-Gear via a USB cable, the app opens automatically. Calibration is then carried out by entering the reference distance and the distance displayed on the odometer. All further calculations are carried out automatically. After disconnecting the connection between the Rally-Gear and the tablet/mobile phone and briefly interrupting the power supply to the Rally-Gear (ignition off-on), the Rally-Gear is calibrated.
The connection between the Rally-Gear and the tablet/mobile phone is only necessary for calibration. The tablet/mobile phone is not required while driving!