Mechanical stopwatches:
General information:
Mechanical stopwatches are no longer in production for most watch manufacturers.
Therefore, most stopwatches offered on various portals (eBay, etc.) are older used goods or old stock.
Statements like "functional, running, all functions flawless,..." only mean that the movement still moves.
Time accuracy is not guaranteed for most of these watches due to gumming, weak springs, or signs of wear, which cannot be achieved even with adjustment attempts.
These watches require at least a complete cleaning, which, depending on the movement and brand, can cost between EUR 50.00 and EUR 300.00.
They should also be branded watches. Most watchmakers thankfully decline any exotic ones.
Mechanical stopwatches are subject to different laws than electronic or quartz-controlled ones.
A direct comparison always disadvantages the mechanical watch, even if the movement is truly flawless.
Absurdities for rally use of mechanical stopwatches:
Watches that are fixed to mounting plates and cannot be removed do not make much sense because they cannot be read in practice in a moving vehicle.
Watches with different dials (30/60, 100/60, 100/30) only confuse and overwhelm your co-driver, but are not really useful for actual use; rather, they serve as an optical eye-catcher in your classic car.
Watch holders with central release are only useful for timing during lap races. Here, only crown-stopper watches can reasonably be used, as stopwatches with side resetters or rattrapante watches would render the central release absurd. For lap time measurements, at least 3 watches should be able to be switched simultaneously > 1 starts - 1 stops - 1 resets.
Not necessarily absurd but impractical are clipboards with mounted watches. Flipping through the roadbook becomes a problem.
Also, in the case of metal clipboards, there is a risk of injury to your co-driver during abrupt braking maneuvers.