Halda Twinmaster

Halda Twinmaster

€2.990,00
Sale price  €2.990,00 Regular price 
Skip to product information
Halda Twinmaster

Halda Twinmaster

€2.990,00
Sale price  €2.990,00 Regular price 


COUNTER
Double counter, functions like the T R I P M A S T E R.

QUICK RESET
As with the TRIPMASTER and is done individually for each counter.

COUNTER GEARBOX
The TWINMASTER's gearbox can be set for 2 functions:
a) Both counters work simultaneously, one recording the total distance and the other special distances.
b) Both counters work alternately through quick changeover. The distance already covered remains stored in one counter and can be evaluated later, while the other counter records the new distance.

CHECKING OTHER MEASURING INSTRUMENTS
Due to their high measuring accuracy - achieved by the technically sophisticated and precise fine adjustment gearbox and the 10-meter roller - both "Master instruments" are suitable for precise checks, e.g. of SPEEDPILOT or speedometers. To monitor the "Master instruments," a check on a measured distance of 100 - 200 m is sufficient.

MOUNTING INSTRUCTIONS
The "Masters" are best installed in front of or under the dashboard of the car. To meet all mounting requirements, the "Master" is provided with mounting holes on the back.
The T-gearbox is screwed onto the vehicle's speedometer. The connection between the T-gearbox and the "Master" is the drive shaft.
In special cases, e.g. due to lack of space, an intermediate shaft must be installed between the speedometer and the T-gearbox. In the standard version, the "Master" is supplied with a straight drive shaft connection on the back. However, if the connection is to be made from the side, an L-gearbox must be ordered additionally. For series connection of several instruments, an additional T-gearbox with a continuous drive to the next instrument must be ordered.
If an existing SPEEDPILOT is to be combined with a "Master", the gearbox on
the back of the SPEEDPILOT must be replaced with a T-gearbox with a continuous drive. The drive shaft of the "Master" is usually supplied with a length of 450 mm.

Dimensions: W x H x D = 110 x 120 x 57 mm

Supplied with mounting screws and mounting/operating instructions

Required accessories:

T-gearbox, drive shaft

Mounting bracket (can be custom-made for your vehicle according to sketch or drawing) 

Passendes Zubehör

Das könnte Ihnen ebenfalls gefallen