Wheel pick-up mechanical
<p>The mechanical wheel collector is mounted on the rim or wheel hub of a non-driven wheel by means of an adapter flange.<br /><br />The adapter flange is permanently connected to the rim or wheel hub. The wheel collector (with integrated 8:1 angular gear) is attached to the adapter flange with a central fixing screw.</p>
<p>An adapter flange blank is included in the package. The adaption of the blank and the mounting of the adapted blank on wheel hub, rim or center lock nut will be charged according to time and effort. <br /><br />If the wheel collector is not needed, it can be removed by loosening the central fixing screw. The adapter flange remains on the rim or wheel hub. The interface between adapter flange and wheel collector is closed by a protective cap when the wheel collector is removed.<br /><br />To ensure the tightness of the wheel collector, the central fixing screw is located under an additional screw plug.<br /><br />The adapter flange must be individually adapted to the rim or wheel hub (central locking nut is also possible). For this it is necessary that you send us the rim and / or wheel hub. <br /><br />The power transmission to the odometer is made by a screw/plug drive shaft.</p>
Price
€780.00
Rally-Drive Speed
<p>The Rally-Drive Speed consists of two coordinated units:<br /><br />1. the control unit in which electrical or electronic pulses from an encoder are detected and converted into a synchronous output voltage for a DC motor. The control unit is splash-proof and can therefore also be installed outside the cockpit.<br /><br />2. the drive unit to the speedometer in which the DC motor is located. This is connected with a cable to the control unit and with a speedometer shaft to the speedometer.<br /><br />The adjustment with the speedometer is carried out individually for each vehicle by means of a tablet or notebook.</p>
Price
€4,200.00
Electronic wheel pick-up
<p>The electronic wheel collector is mounted on the rim or wheel hub of a non-driven wheel by means of an adapter flange.<br /><br />The adapter flange is permanently connected to the rim or wheel hub. The wheel collector is attached to the adapter flange with a central fixing screw.<br /><br />If the wheel collector is not needed, it can be removed by loosening the central fixing screw. The adapter flange remains on the rim or wheel hub.<br /><br />The interface between adapter flange and wheel collector is closed by a protective cap when the wheel collector is removed.<br /><br />To ensure the tightness of the wheel collector, the central fixing screw is located under an additional screw plug.<br /><br />The adapter flange must be individually adapted to the rim or wheel hub (central locking nut is also possible). Therefore it is necessary that you send us the rim and / or wheel hub. The wheel pick-up delivers 6 pulses per revolution with 2 independent sensors.<br /><br />The supply voltage is 5-24V. The cables are routed in a plastic tube and protected against the penetration of dirt and moisture and damage.<br /><br />The maximum cable length is 1.8m. The connection is made via a 6-pin screwable plug.</p>
Price
€1,198.00
