Mechanical wheel sensor
The mechanical wheel sensor is sealed against dust and splash water and is mounted on the rim or wheel hub of a non-driven wheel using an adapter flange.
The adapter flange is permanently connected to the rim or wheel hub. The wheel sensor (with integrated 8:1 angle gearbox) is attached to the adapter flange with a central mounting screw.
An adapter flange blank is included in the scope of delivery. The adaptation of the blank and the mounting of the adapted blank on the wheel hub, rim or central locking nut will be charged separately.
If the wheel sensor is not needed, it can be removed by loosening the central mounting screw. The adapter flange remains on the rim or wheel hub. The interface between the adapter flange and the wheel sensor is closed with a protective cap when the wheel sensor is dismounted.
To ensure the tightness of the wheel sensor, the central mounting screw is located under an additional screw plug.
The adapter flange must be individually adapted to the rim or wheel hub (a central locking nut is also possible). For this purpose, it is necessary that you send us the rim and/or wheel hub.
Power transmission to the distance counter is achieved by a screw/plug drive shaft