Language:
Rally-Drive GT
<p>The Rally-Drive GT consists of two coordinated units:<br /><br />1. The control unit in which electrical or electronic pulses from a speedometer signal or other encoder are detected and converted into a synchronous control signal for a stepper motor. The control unit is splash-proof and can therefore also be installed outside the cockpit.<br /><br />2. The drive unit for the Rally-GT which is mounted directly on our Rally-GT odometer instead of the change gear holder (for X and Z gears). The drive unit can be mounted without any modifications or alterations to the Rally-GT and can be exchanged at any time for the change gear mount.</p>
Price
€3,490.00
Rally-Gear
<p>With Rally-Gear it is possible to operate the mechanical odometer Rally-GT and all other mechanical odometers in vehicles in which no speedometer shaft is available to drive the odometers.<br /><br />If the vehicle in question is equipped with an electric/electronic speedometer, the speedometer signal is tapped and used to control Rally-Gear. The Rally-Gear software recognises the characteristics of the speedometer signal and adjusts itself automatically (self-learning).<br /><br />If there is no corresponding speedometer signal available, it is possible to supply the Rally-Gear with the necessary signals via its own sensor. The sensor is mounted on the vehicle in such a way that it picks up the rotation e.g. from the cardan shaft or from a wheel and thus generates the signals.<br /><br />The odometer is driven by a stepper motor that changes its speed synchronously with the input signals.<br /><br />The connection between the odometer and Rally-Gear is made by a plug/plug-in drive shaft (see "Accessories" section)<br /><br />The Rally-Gear is powered by the 12V on-board voltage.<br /><br />When driven by Rally-Gear, the odometer is not referenced by exchanging the gears on the odometer but by adjusting the ratio of input signals and stepper motor speed in Rally-Gear.<br /><br />An app (Android only) is available for this purpose, which is installed on a tablet or mobile phone. If the tablet or mobile phone is connected to Rally-Gear via USB cable, the app will open automatically. Referencing is then carried out by entering the reference distance and the distance displayed on the odometer. All further calculations are performed automatically. After disconnecting the connection between Rally-Gear and tablet/mobile phone and briefly interrupting the power supply to Rally-Gear (ignition off/on), Rally-Gear is referenced.<br /><br />The connection between Rally-Gear and tablet/mobile phone is only necessary for referencing. The tablet/mobile phone is not needed while driving!</p>
Price
€3,390.00
RallyeMaster BASIC 2
<p style="text-align:left;"><strong>FEATURES</strong><br /><br /></p>
<ul>
<li>System reset</li>
<li>Energy-saving LED lighting (can be switched off)</li>
<li>Connection for cutting control (10m pulse, 12 Volt, required as additional cable)</li>
<li>System plug for quick conversion to other vehicles</li>
<li>Calibration on the front</li>
<li>Compact design</li>
<li>Retrodesign with matt black coating</li>
<li>Mounting bracket</li>
</ul>
<p style="text-align:left;"><br /><br /><strong>TECHNICAL DATA:</strong><br /><br />Dimensions W/H/D 148/57/90 mm (housing, without switch)<br />Voltage 12-14 Volt<br />Sensor voltage 5 Volt<br />Connection Average pulse 10m/operating voltage 12V</p>
Price
€799.00
RallyeMaster DIN
<p><strong>FEATURES:</strong></p>
<ul style="list-style-type:disc;">
<li>LED-illumination can be switched off</li>
</ul>
<p><br /><strong>TECHNICAL DATA:</strong><br /><br />Dimensions W/H/D 185/50/90 mm (housing, without switch)<br />Voltage 12-14 Volt<br />Sensor voltage 5 Volt Connection</p>
Price
€900.00
Rally-Trigger 2
<p>The stopwatches can be easily inserted into the rally trigger by hand and removed just as easily.<br /><br />By pressing (push down) the middle control knob, both stopwatches are operated simultaneously.<br /><br />At the same time each watch can be operated individually by pressing the upper button.<br /><br />The Rally Trigger can be adapted to Hanhart stopwatches with 55mm diameter as well as Heuer stopwatches with 53 or 58.5mm diameter.<br /><br />It is also possible to use different stopwatches of different manufacturers and sizes in one Rally-Trigger.<br /><br />The individual adaptation to stopwatches of other manufacturers and sizes is possible on request.<br /><br />The stopwatch is held in the Rally-Trigger by a snap-in mechanism and is gently mounted on elastic rubber elements.<br /><br />The Rally-Trigger is made of CNC-milled and anodized aluminium. All screws are made of stainless steel.<br /><br />For the attachment at the vehicle 4 pcs. Drillings with 4,2mm diameter and countersink are provided for the mounting on the car.<br /><br />Dimensions of the base plate: width 146mm x height 70mm<br /><br />Overall dimensions with stopwatch: width 146mm x height approx. 110mm x thickness approx. 40mm (height and thickness depend on the used clock)</p>
Price
€780.00
RallyeMaster DIN Sice
<p><strong>FEATURES:</strong></p>
<ul style="list-style-type:disc;">
<li>LED-illumination can be switched off</li>
<li>Possibility of connecting an editing computer</li>
</ul>
<p><br /><strong>TECHNICAL DATA:</strong></p>
<p>Dimensions W/H/D 185/50/90 mm (housing, without switch)<br />Voltage 12-14 Volt<br />Sensor voltage 5 Volt<br />Connection Average pulse 10m/operating voltage 12V</p>
Price
€950.00
Rally-Trigger 3
<p>The stopwatches can be easily inserted into the rally trigger by hand and removed just as easily.<br /><br />By pressing (push down) the middle control knob, both stopwatches are operated simultaneously.<br /><br />At the same time each watch can be operated individually by pressing the upper button.<br /><br />The Rally Trigger can be adapted to Hanhart stopwatches with 55mm diameter as well as Heuer stopwatches with 53 or 58.5mm diameter.<br /><br />It is also possible to use different stopwatches of different manufacturers and sizes in one Rally-Trigger.<br /><br />The individual adaptation to stopwatches of other manufacturers and sizes is possible on request.<br /><br />The stopwatch is held in the Rally-Trigger by a snap-in mechanism and is gently mounted on elastic rubber elements.<br /><br />The Rally-Trigger is made of CNC-milled and anodized aluminium. All screws are made of stainless steel.<br /><br />For the attachment at the vehicle 4 pcs. Drillings with 4,2mm diameter and countersink are provided for the mounting on the car.<br /><br />Dimensions of the base plate: width 221mm x height 70mm<br /><br />Overall dimensions with stopwatch: width 221mm x height approx. 110mm x thickness approx. 40mm (height and thickness depend on the used clock)</p>
Price
€940.00
RallyeMaster SPORT
<p><strong>FEATURES:</strong></p>
<ul>
<li>LED-illumination can be switched off</li>
<li>100m beep tone for cutting control, can be switched off</li>
<li>+10m button for adjustment of the track section drive after erroneous runs</li>
<li>Switch for stopping the section drive</li>
<li>Possibility of connecting an editing computer</li>
</ul>
<p><br /><strong>TECHNICAL DATA:</strong><br /><br />Dimensions W/H/D 195/57/90 mm (housing, without switch)<br />Voltage 12-14 Volt<br />Sensor voltage 5 Volt<br />Connection Average pulse 10m/operating voltage 12V</p>
Price
€999.00
Slava stopwatch - Bracket
<p>The holder consists of 2 parts: The threaded ring and the bayonet plate.<br /><br />The threaded ring is screwed onto the Slava stopwatch instead of the rear movement cover.<br /><br />Then the bayonet plate is inserted into the threaded ring and aligned so that the stopwatch is straight in the bayonet mount.<br /><br />The bayonet plate is fixed with the 3 stud screws located at the circumference.<br /><br /><br /><br /><br /></p>
Price
€139.00